6ES7334-0KE00-0AB0
Siemens 6ES7334-0KE00-0AB0 — SM 334 Analog Input/Output Module
The 6ES7334-0KE00-0AB0 is an S7-300 SM 334 signal module in the Siemens SIMATIC S7 PLC family. It combines 4 analog inputs and 2 analog outputs in one housing, with 12-bit resolution, Pt100 temperature measurement, resistance measurement and 0–10 V measurement on specific inputs. When comparing S7-300 analog modules, check the signal types supported by each channel as well as the total channel count.
Input channels and measuring ranges
Channels 0 and 1 support Pt100 temperature or resistance measurement; they cannot be configured as 0–10 V inputs. Channels 2 and 3 additionally support 0–10 V signals. The four analog inputs therefore provide a maximum of two voltage input channels.
The specified −120 to +155 °C range is the Pt100 climatic measuring range, not the module's ambient operating temperature range. The resistance measuring range is 0–10 kΩ, and the manual specifies 4-wire connections for resistance and Pt100 measurement. Select a suitable temperature sensor by checking the probe's rated range, wiring arrangement and process conditions.
The inputs are arranged in two channel groups. A Pt100 input and a 10 kΩ resistance input cannot be combined within the same group because the two channels share a measuring current source. For channels 2 and 3, the manual permits combinations of one temperature input plus one voltage input, or one resistance input plus one voltage input.
Analog outputs and electrical design
The module provides two 0–10 V analog outputs. This model does not provide 4–20 mA current inputs or outputs, or direct thermocouple inputs. Applications using current signals require a suitable analog module or an appropriately selected signal converter.
The nominal supply is 24 V DC, and field wiring uses a 20-pin front connector. The module provides galvanic isolation from the backplane bus and load supply; this does not mean that every analog channel is individually isolated from the others. Allow for the 40 × 125 × 117 mm housing dimensions when planning the cabinet layout.
Selection, replacement and commissioning
Before replacing an existing module, compare its complete 6ES7334-0KE00-0AB0 order number, STEP 7 hardware configuration, channel assignments and field wiring. Different order numbers carrying the SM 334 family name should not be assumed to be interchangeable. For system expansion, explore the available PLCs and modules.
PDF files and technical reference
For wiring diagrams, channel settings and technical manuals, visit the S7-300 PDF files page. Manufacturer reference: Siemens 6ES7334-0KE00-0AB0 product information.
Related topics and product groups
S7-300 analog modules · Siemens S7 PLC products · What is Pt100? · Temperature sensors · Analog signal converters · PLCs and modules · Second-hand equipment · OtomasyonAVM home