6ES7326-1BK01-0AB0

6ES7326-1BK01-0AB0 Siemens SM 326 24-Input Fail-Safe Module

6ES7326-1BK01-0AB0 is an SM 326 fail-safe digital input module in the Siemens SIMATIC S7-300 family, with 24 digital inputs, a 24 V DC input rating and a 40-pin front connector. Designed for SIMATIC fail-safe systems, it supports diagnostic interrupts. It is relevant to acquiring safety signals in an existing PLC installation and selecting a spare with the same complete order number.

24 physical inputs and dual-channel evaluation

The module supports 1oo1 and 1oo2 sensor evaluation. With 1oo1 evaluation, inputs are evaluated individually; with 1oo2 evaluation, two physical inputs are evaluated together. Using every input in 1oo2 mode provides 12 input pairs. The 24-input rating therefore does not mean 24 independent dual-channel safety signals. Check sensor wiring, channel pairing and discrepancy time against the existing safety project.

System compatibility, supply and addressing

Safety applications require a suitable combination of F-CPU, safety program and hardware configuration. The operating mode and PROFIsafe address in the STEP 7 project must agree with the module’s address-switch settings. When selecting a power supply, consider sensor consumption and the manufacturer’s PELV requirements as well as voltage. DIN rail power supplies can be reviewed for cabinet installation; verify the suitability of each device from its technical documentation.

1BK01 revision and product lifecycle

Siemens lists 6ES7326-1BK01-0AB0 as having reached the end of its product lifecycle. Select a spare using the complete 1BK01 order number and hardware revision on the label. When comparing it with 6ES7326-1BK02-0AB0, check wiring, project support and safety installation requirements individually. Do not attribute a newer revision’s features to the older module simply because both carry the SM 326 designation.

Selecting a used module

Inspect the label, address switches, connector contacts and any signs of previous work on the housing. Test information should identify which inputs were checked, the operating mode and the system used. Illuminated LEDs alone do not establish that the safety function has been validated. Confirm whether the front connector and other accessories are included. Commissioning a used module also requires validation of the affected system safety functions.

PDF files and manufacturer references

General documentation is available through the S7-300 PDF files section. Section 8.3 of the Siemens Fail-safe Signal Modules manual, A5E00085586-09, 02/2008, directly covers this order number and provides wiring and parameter information. This PDF is a distributor-hosted copy of the Siemens manual. Use the Siemens product page for the product record and the 07/2013 Siemens manual for revision-dependent installation requirements.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home