6ES7322-1BH01-0AA0

6ES7322-1BH01-0AA0 Siemens SM 322 16-Channel 24 V DC Digital Output Module

6ES7322-1BH01-0AA0 is an SM 322 module in the Siemens SIMATIC S7-300 family, providing 16 digital outputs, a 24 V DC load voltage and a nominal current of 0.5 A per channel. It is suitable for solenoid valves, DC contactors and indicator lamps. When selecting a spare for an existing PLC system, check the full order number, load current, group total and wiring arrangement together.

Supply and 20-pin front connector

The rated load supply is 24 V DC, with a permissible range of 20.4–28.8 V DC. Field wiring uses a 20-pin front connector. Include the connected loads when sizing the supply, and compare existing wire and terminal identification with the wiring diagram. Confirm whether the front connector is included in the delivery.

Eight-channel groups and total current

The outputs form two electrically isolated groups of eight. Total current per group is limited to 4 A up to 40 °C and 3 A up to 60 °C with horizontal mounting, or 2 A up to 40 °C with vertical mounting. At 60 °C, eight outputs each drawing 0.5 A in one group would exceed its 3 A limit. Plan load distribution using the actual cabinet temperature.

Short-circuit protection and status indication

The module has electronic short-circuit protection with a typical response threshold of 1 A. This threshold is not the continuous channel rating. Each channel has a green status LED; the module provides no diagnostic functions or interrupts. An LED indication alone therefore does not confirm correct operation of the connected load. Connecting two outputs in parallel to increase current capacity is not supported.

Used-unit checks and related models

Inspect the label, front connector contacts and signs of thermal stress, and request test information covering every channel under a suitable load. Check the version difference when comparing 6ES7322-1BH00-0AA0. 6ES7322-1BH10-0AA0 is the High Speed model, while 6ES7322-1BL00-0AA0 has 32 outputs. Compare hardware configuration and wiring compatibility before replacement.

PDF files and connection information

Use the S7-300 PDF files section for technical documentation. Locate the complete order number 6ES7322-1BH01-0AA0 and the SM 322; DO 16 × DC 24 V/0.5 A section. Apply the group-current tables for this model when checking wiring and calculating loads.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home