6ES7321-1CH00-0AA0
6ES7321-1CH00-0AA0 Siemens SM 321 16-Channel 24–48 V AC/DC Digital Input Module
6ES7321-1CH00-0AA0 is an SM 321 digital input module in the Siemens SIMATIC S7-300 family, providing 16 inputs for 24–48 V AC/DC signals. Each channel is individually electrically isolated, and field wiring uses a 40-pin front connector. It acquires status signals from separate field circuits for monitoring in the PLC system.
A separate common connection for each channel
Each input has its own common connection. Do not directly apply the wiring arrangement of an input module with shared group commons. When replacing a module in an existing machine, compare input terminal pairs, terminal numbers and field-circuit references with the manufacturer’s diagram. Also consider whether external links would connect otherwise separate circuits.
Input voltage and model identification
Siemens specifies 14–60 V for signal “1” and −5 to +5 V for signal “0”. Do not infer a stable logic state from values outside these ranges. 6ES7321-1CH20-0AA0 is a different model with 48–125 V DC inputs. When selecting a spare, compare the complete order number and AC/DC signal type, rather than relying only on the SM 321 designation or input count.
Input delay and sensor requirements
Input delay is 16 ms maximum for both signal transitions. For short-pulse applications, evaluate this delay together with the CPU scan time. Two-wire sensors are supported, with a permissible quiescent current of 1 mA maximum. Check the sensor’s own data sheet for its off-state current.
Status indication and used-unit checks
The channels have green status LEDs; the module provides no diagnostic functions or interrupts. When assessing a used unit, inspect connector contacts, identification and signs of previous work. Request testing of all 16 channels with suitable signals and confirmation of the corresponding PLC input changes. Test information should state the voltage and AC/DC type used; a 24 V DC test alone does not establish that 48 V AC operation was also tested.
PDF files and manufacturer references
General documentation is available through the S7-300 PDF files section. This product is covered in section 3.14, printed pages 94–96 of the Siemens S7-300 Module Data manual. Check the wiring diagram and specifications against the complete order number. The Siemens 6ES7321-1CH00-0AA0 data sheet also documents channel isolation, sensor requirements and the front connector.
Related topics and categories
S7-300 main page | Special and function modules | Analog and special signal modules
S7-300 CPU modules | Digital input modules | Digital output modules
S7-300 memory cards | Siemens S7 PLC range | Used Siemens products
HMI operator panels | Second-hand main page | OtomasyonAVM home