6ES7321-1BH81-0AA0
Siemens 6ES7321-1BH81-0AA0 S7-300 SM321 Digital Input Module
The Siemens 6ES7321-1BH81-0AA0 is an SM321 module from the SIMATIC S7-300 family with 16 digital inputs rated at 24 V DC. It belongs to the SIMATIC Outdoor range for extended environmental conditions. When selecting a replacement, check the complete BH81 order number and environmental requirements alongside the input count.
Operating temperature and installation
The operating temperature range is −25 to +60 °C with horizontal installation and −25 to +40 °C with vertical installation. The Outdoor designation does not mean the module can operate exposed to rain. Select the enclosure and mounting arrangement for the application environment.
Digital input characteristics
The inputs are isolated from the backplane bus, without individual channel isolation. Each channel has a green status LED. Input delay is 1.2–4.8 ms for both signal transitions. The module provides no interrupt or diagnostic functions.
Field connections and application checks
When connecting pushbuttons, limit switches, inductive sensors or photoelectric sensors, check the device output type, signal voltage and wiring diagram together. A sensor operating from a 24 V DC supply does not automatically have an output compatible with the input module.
Before commissioning, compare the front connector wiring, reference connections, module slot and STEP 7 input addresses. Alongside observing the channel LEDs, verify that the PLC program reads each signal at the intended address.
Model comparison and used equipment assessment
The original Siemens module manual identifies 6ES7321-1BH01-0AA0 as the corresponding standard model for BH81. When considering a standard module, assess the application's extended environmental requirements separately. A replacement decision should account for the complete order number, existing project and installation conditions.
For a used module, inspect label readability, connector contacts, housing condition and any signs of corrosion. Requesting a functional test record covering all 16 inputs is useful. A room-temperature input test does not establish performance across the extended temperature range. Confirm whether the front connector, backplane bus connector and other accessories are included with the particular unit.
Technical documentation
Consult the Siemens Released Modules PDF for the product designation and the archived Siemens S7-300 / M7-300 Module Specifications manual for operating conditions and the standard-module mapping. In the original manual, section 1.7 covers SIMATIC Outdoor modules and section 3.1.2 covers the corresponding standard digital input module.
Related topics and product groups
Siemens S7-300 | S7-300 digital input modules | S7-300 digital output modules | S7-300 analog modules
S7-300 CPU modules | Siemens S7 PLCs | PLC products | Siemens ET200 information
Used PLC power supplies | Sensors | Sensor connectors | S7-300 PDFs and technical files
Used Siemens products | Used automation equipment | 6ES7321-1BH01-0AA0 | 6ES7321-1BH02-0AA0