6ES7313-6CG04-0AB0

6ES7313-6CG04-0AB0 Siemens CPU 313C-2 DP Compact PLC

6ES7313-6CG04-0AB0 is a CPU 313C-2 DP compact processor with 128 KB working memory, integrated digital I/O and a PROFIBUS DP interface in the Siemens SIMATIC S7-300 family. When selecting it for an existing PLC system, check the complete order number, I/O requirements, communication architecture, counter usage and memory card compatibility together.

Integrated digital inputs and outputs

The CPU provides 16 digital inputs rated at 24 V DC and 16 digital outputs. The transistor outputs have a rated current of 0.5 A per channel; also observe the total current limits for each output group. Suitable sensor and contact signals can be read directly through the integrated inputs.

No analog I/O is integrated. For analog measurement or reference signals, assess suitable S7-300 analog modules separately. The integrated I/O requires one 40-pin front connector.

High-speed counters and measurement functions

Three 30 kHz high-speed counters support pulse-counting applications. When connecting an encoder, check signal levels, counting mode and input assignments. Technology functions share the integrated I/O resources; do not treat a terminal assigned to different functions as several independent channels.

MPI and PROFIBUS DP communication

The X1 MPI interface supports up to 187.5 kbit/s, while the X2 PROFIBUS DP interface supports up to 12 Mbit/s. The DP interface can operate as a master or slave, according to project configuration. There is no integrated PROFINET interface; select the network connection to match the existing system.

Before replacing the CPU, match MPI/DP addresses, baud rates, connected stations and operator panel connections. Check that the STEP 7 hardware catalog supports the complete order number and the firmware version installed in the unit.

Memory, supply and installation

The 128 KB working memory cannot be expanded. A compatible SIMATIC Micro Memory Card (MMC) is required for operation. Verify memory card capacity and compatibility against the project; card capacity is separate from working memory. Back up the existing program and parameters before replacement.

The rated supply is 24 V DC, with an allowable range of 19.2–28.8 V DC. Include the CPU and field loads when sizing the 24 V DC power supply. Dimensions are 80 × 125 × 130 mm. For a used unit, confirm whether the MMC and front connector are included, and inspect the connectors and I/O operation.

PDF files and manuals

Use the S7-300 PDF files section for wiring, parameterization and technical documentation. Match order number 6ES7313-6CG04-0AB0 and the CPU 313C-2 DP designation in the manual.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home