6ES7313-6CE00-0AB0
Siemens 6ES7313-6CE00-0AB0 – CPU 313C-2 DP Compact PLC
6ES7313-6CE00-0AB0 is a SIMATIC S7-300 CPU 313C-2 DP compact processor with 32 KB of work memory. It includes 16 digital inputs, 16 digital outputs, three fast counters, MPI and PROFIBUS-DP interfaces. It uses a 24 V DC supply and requires a SIMATIC Micro Memory Card (MMC). When selecting from the S7-300 CPU range, compare the complete order code, memory, channel requirements, counter functions and network arrangement.
Integrated I/O and fast counters
The onboard inputs accept 24 V DC digital signals. Digital outputs support a maximum load current of 0.5 A per channel, subject to total-current and temperature limits. Where more channels are needed, select suitable digital input and digital output modules for the project.
Three fast counters handle input signals up to 30 kHz. Counting and other technological functions share terminals with standard I/O, so check pin assignments and the remaining available channels against the application. Review signal level, output type, frequency and wiring when selecting a sensor or encoder.
The CPU 313C-2 DP has no integrated analog I/O. Analog channel specifications for CPU 313C or CPU 314C models do not apply. Select suitable S7-300 analog modules where analog measurement or control is required. The onboard digital channels use one 40-pin front connector.
MPI and PROFIBUS-DP connections
The CPU provides separate MPI and PROFIBUS-DP interfaces. MPI supports programming and compatible HMI panels. Depending on configuration, the DP interface operates as a PROFIBUS-DP master or slave. Master operation supports up to 32 DP slaves and a maximum communication speed of 12 Mbit/s.
For an existing installation, match the DP operating role, station address, transmission rate and I/O mapping to the project. Check PROFIBUS connectors, bus termination and the configuration of connected devices. There is no onboard PROFINET/Ethernet port; Ethernet requirements need a suitable CP module whose compatibility with this CPU version has been verified.
MMC and project compatibility
The 32 KB work memory cannot be expanded. The MMC provides load memory; a larger card does not increase work memory. For a used CPU, check whether the MMC is included, readable and correctly programmed. A program from a previous machine should not be assumed suitable for the new application.
Before replacement, back up the STEP 7 project, hardware configuration, data blocks and counter settings. Match the CPU hardware and firmware version to the project. Assess the cabinet 24 V DC power supply, output loads and field connections together.
Assessing a used CPU
When assessing this CPU among used Siemens products, include MPI access, MMC reading, RUN/STOP transitions, all 16 DI/16 DO and DP communication in the test scope. Test the fast counters with a suitable signal source if required. An illuminated RUN LED alone does not validate every function.
Confirm the label photograph, physical condition, test results and delivery contents before ordering. Do not assume that the MMC, 40-pin front connector, power plug and bus connector are included.
Related topics and product groups
S7-300 overview | S7-300 CPU modules | Digital input modules
Digital output modules | Function modules | Analog module range
Used Siemens products | Used equipment overview | OtomasyonAVM home
Manufacturer references
Siemens – 6ES7313-6CE00-0AB0 technical data sheet (archived copy) | Siemens – CPU 31xC technical specifications manual, 10/2001 (archived copy)