6ES7307-1KA02-0AA0

Siemens 6ES7307-1KA02-0AA0 – PS307 24 V DC / 10 A Power Supply

6ES7307-1KA02-0AA0 is a regulated Siemens SIMATIC S7-300 PS307 power supply with 120/230 V AC input and 24 V DC / 10 A output. Its nominal output capacity is 240 W. It supplies 24 V loads in S7-300 and ET 200M systems. When selecting industrial power supplies, consider the input voltage, total load current, mounting arrangement, cabinet temperature and test condition.

AC input and automatic range selection

The unit operates from a single-phase 120/230 V AC, 50/60 Hz supply and provides automatic input voltage range selection. Permitted input ranges are 85–132 V AC and 170–264 V AC. These two ranges should not be interpreted as one continuous 85–264 V input range.

Screw terminals are provided for L, N and PE at the input and L+ and M at the output. Match conductor sizing, protective devices and grounding to the cabinet design. Installation and wiring must be performed by qualified personnel with the supply isolated.

24 V output and load capacity

The 24 V DC output is fixed and cannot be adjusted by the user. The 10 A rating is the total capacity across all output connections. Multiple L+ and M terminals do not provide a separate 10 A allowance at each terminal.

The load calculation should include the supply consumption of the CPU module, digital input circuits, loads driven by digital outputs and other equipment sharing the supply. Assess continuous consumption and startup current separately.

If analog modules, transmitters and HMI panels share the supply, also review voltage drop, cable routing and switching effects from other loads. A replacement decision should consider more than the current rating printed on the existing unit.

Protection, mounting and cabinet layout

The PS307 provides galvanic isolation between input and output and electronic short-circuit protection. Output voltage can return automatically after the short circuit is removed. The green status LED indicates the presence of output voltage; it does not by itself confirm satisfactory operation at rated load.

The housing is 80 mm wide and mounts on an S7-300 profile rail. A suitable mounting adapter should be considered for standard DIN rail installation. The IP20 unit uses natural convection over an operating range of 0 to +60 °C; maintain at least 40 mm clearance above and below. Allow for cable ducts and heat from neighbouring equipment when arranging the cabinet.

Assessing a used power supply

When assessing this model among used Siemens products, measure output voltage at no load and under progressively increased load. A suitable test setup should verify operation up to rated load, restart behaviour, output ripple and heating. Investigate voltage sag or repeated output cycling as the load increases.

Review the label photograph, terminal screws, covers, mounting parts and physical condition before ordering. The test report should identify the applied load, measured voltage and test duration. Confirm price, availability, delivery contents and any warranty terms for the actual unit offered.

Related topics and product groups

S7-300 overview  |  S7-300 CPU modules  |  Digital input modules

Digital output modules  |  Function modules  |  Analog module range

Used Siemens products  |  Used equipment overview  |  OtomasyonAVM home

Manufacturer references

Siemens – 6ES7307-1KA02-0AA0 product information  |  Siemens – PS307 technical data sheet (archive copy)  |  Siemens – PS307 operating and installation instructions