6ES7 157-0AA82-0XA0

6ES7 157-0AA82-0XA0 is a Siemens SIMATIC DP IM 157 interface module. Combined with one or more DP/PA couplers, it forms a DP/PA Link, connecting PROFIBUS PA field devices to the higher-level PLC system through PROFIBUS DP. This version provides DPV1 support and an extended operating temperature range, making its exact identification relevant when maintaining existing process automation installations.

Product Description and Operating Principle

Within a DP/PA Link, the IM 157 operates as a PROFIBUS DP slave on the higher-level network, while communication with PA devices takes place through the connected couplers. The arrangement separates the transmission rates of the DP and PA networks. For background information, see PROFIBUS and PROFINET explained. Related products are available in our Siemens communication interfaces section.

The interface module and the DP/PA coupler perform complementary tasks. The IM 157 handles the communication interface, while the appropriate coupler provides the physical PA connection and power for bus-powered field devices. When selecting pressure measuring devices or other sensors, check that they have a suitable PROFIBUS PA interface. A transmitter with only a 4–20 mA output cannot be connected directly to the IM 157 as a PA device.

Technical Data

Manufacturer: Siemens
Product family: SIMATIC DP
Order number: 6ES7 157-0AA82-0XA0
Module designation: IM 157 interface module
Communication: PROFIBUS DP / DPV1
Higher-level PROFIBUS DP rate: 9.6 kbit/s to 12 Mbit/s
PROFIBUS PA rate: 31.25 kbit/s on the coupler’s PA side
Rated supply: 24 V DC
Permitted supply range: 20.4–28.8 V DC
DP/PA couplers: Up to 5
Lower-level device capacity: Up to 64; data and segment limits also apply
Dimensions, W × H × D: 40 × 125 × 130 mm
Operating temperature, horizontal mounting: −25 to +60 °C
Operating temperature, vertical mounting: −25 to +40 °C

The temperature ratings apply to the IM 157 itself. The operating limits of the complete assembly must also account for its couplers, bus modules and other components. Likewise, the 12 Mbit/s rating of the higher-level DP network does not describe the PA segment speed. When planning a segment, check the coupler capacity, field-device consumption and cable arrangement together.

DP/PA Link and Y Link Applications

A DP/PA Link connects PROFIBUS PA devices to PROFIBUS DP. In a Y Link, two IM 157 modules and a Y coupler connect a redundant S7-400H DP system to a non-redundant downstream DP network. Before ordering a replacement, identify which arrangement is installed. The coupler type and station configuration are just as relevant as the interface module itself.

Hardware Compatibility and Commissioning

Before replacement, record the complete order number, hardware revision, firmware version and configured device entry. Siemens compatibility documentation lists the BM IM/IM 6ES7 195-7HD80-0XA0 bus module with this IM 157 version. A different bus module should not be considered suitable solely because it physically fits. Compare complete part numbers when selecting connection modules.

In the STEP 7 hardware configuration, the station address, downstream devices and device definitions should match the installed equipment. Check the higher-level master’s capabilities when using DPV1 functions. Back up the running project and retain the existing communication settings before making changes; these records make recommissioning and troubleshooting easier.

For power supply checks, measure at the module connection under operating load as well as at the power supply output. An appropriate DIN-rail power supply, suitable protection and accessible control panel components help keep maintenance manageable. Follow the installation’s safe shutdown procedure before disconnecting cables or removing equipment.

LED Indicators and Fault Checks

SF: Group fault.
BF1: Higher-level PROFIBUS DP bus fault.
BF2: Downstream bus fault.
ACT: Active channel.
ON: 24 V supply indication.

During fault investigation, record which indicators are steady or flashing and compare their combination with the manual’s diagnostic table. Check the supply, station address, project configuration and bus termination before concluding that the module is defective. Select cables and connectors suitable for the communication standard, and compare shielding and connection continuity with the installation drawings.

Practical Selection Notes and Related Products

For a replacement enquiry, photographs of the front label, side label, mounting base and complete station can help identify the required version. Confirm whether the quotation covers only the IM 157 module or also includes couplers and bus modules. If a communication test is offered, ask which master, coupler and field devices were used and what the test covered.

You can also review the related 6ES7 157-0AA00-0XA0, 6ES7 157-0AA80-0XA0 and 6ES7 157-0AA81-0XA0 pages. These links support comparison and do not establish direct interchangeability. Additional equipment is listed in the Siemens ET200 product section.

User Manuals and PDF Documents

+ Siemens ET200 PLC User Manuals — PDF archive page.

+ Siemens IM 157 — DP/PA Link and Y Link Manual — December 2002; covers 6ES7 157-0AA82-0XA0 from firmware V4.0.0. An externally hosted copy of the Siemens manual.

+ Siemens DP/PA Link and Y Link — Hardware Compatibility — compatibility section of the July 2011 system manual, which also covers later hardware generations.

+ Siemens ET200 General Catalogue — general product-family reference, rather than a dedicated manual for this model.

++ Siemens Automation Main Page >
++ Siemens Product Enquiries — contact Otomasyon AVM.
++ About Siemens ET200 PLC Systems >

Reminder: Please confirm current availability, condition and delivery contents with Otomasyon AVM for the Siemens 6ES7 157-0AA82-0XA0 and other SIMATIC products. Some items are used equipment; take this into account before purchasing. Products will not be restocked once sold out. This page provides general information; the product label, hardware revision and applicable manufacturer documentation should be checked for your installation.

Note: Manuals, commissioning suggestions and troubleshooting notes are provided for reference and are not binding. Content may be updated or expanded. The Otomasyon AVM Community welcomes practical feedback. If you have experience with this product, you can share your observations with us.

Technical references: Siemens DP/PA Link and Y Link Bus Couplings, December 2002, IM 157 specifications and LED diagnostics; Siemens DP/PA Link listing on PROFIBUS & PROFINET International; hardware compatibility section of the Siemens July 2011 system manual.