6ES7 151-7AA20-0AB0

Siemens 6ES7 151-7AA20-0AB0 — ET 200S IM151-7 CPU

6ES7 151-7AA20-0AB0 is the IM151-7 CPU module for the Siemens SIMATIC ET 200S system. Its article number without spaces is 6ES7151-7AA20-0AB0. It executes a local user program and controls the inputs and outputs of an ET 200 station. It can operate as a standalone controller or as an intelligent PROFIBUS DP slave connected to a higher-level controller.

Memory and Electrical Specifications

The CPU has 96 KB of work memory, which cannot be expanded. Load memory is provided by a SIMATIC Micro Memory Card (MMC), with a supported maximum capacity of 8 MB. A suitable SIMATIC MMC is required for operation. Program storage does not require a battery; MMC capacity and CPU work memory are separate specifications.

The rated supply is 24 V DC, with a permissible range of 20.4–28.8 V DC. Housing dimensions are 60 × 119.5 × 75 mm (width × height × depth), and the degree of protection is IP20. These ratings describe the CPU; power requirements for connected I/O modules and field loads must be calculated separately.

MPI and PROFIBUS DP Communication

The integrated 9-pin D-sub female MPI/PROFIBUS DP interface uses RS-485. The built-in DP interface operates as a DP slave. DP master operation is available through the additional 6ES7138-4HA00-0AB0 master module. There is no integrated PROFINET port. Consider the differences between PROFIBUS and PROFINET when assessing the network architecture.

Programming and Hardware Configuration

For this article number with V2.6 firmware, Siemens specifies STEP 7 V5.4 SP3 or later for full functionality, or STEP 7 V5.2 SP1 with HSP 0128 as an alternative. Check the actual firmware of the installed device and its hardware catalog entry. Before replacement, compare the program backup, MMC contents, station address and module sequence.

Station Configuration with ET 200S Modules

The station supports up to 63 ET 200S peripheral modules, subject to address-space, station-width and power limits. Depending on the application, select digital input, digital output and analog input modules. These links describe module groups; compatibility with ET 200S and the CPU version must be verified using each module's complete article number.

Terminal blocks and connection components must match the electronic modules. Select power supply modules and the power distribution arrangement according to potential groups and load currents. Additional modules and accessories also form part of the hardware configuration.

Standard CPU and Fail-safe CPU

6ES7151-7AA20-0AB0 is a standard CPU. The IM151-7 F-CPU with article number 6ES7151-7FA20-0AB0 is a separate model. Projects involving safety modules and PROFIsafe require the appropriate F-CPU, safety software and compatible hardware. Similar model names do not imply identical safety capabilities.

PDF Documentation and User Manuals

For wiring diagrams, hardware configuration and detailed specifications, visit the Siemens ET 200 PDF and user manuals page. Select documentation for 6ES7151-7AA20-0AB0; IM151-7 CPU variants with different article-number suffixes can have different memory and software specifications.

Related Topics

Functional modules · Counter modules · Positioning modules · Special input modules · Special output modules · Other network interfaces

Navigation: Siemens ET 200 · SIMATIC S7 · Siemens S7 PLC · ET 200 manuals

Technical sources: Siemens 6ES7151-7AA20-0AB0 product data sheet; IM151-7 CPU Product Information, A5E01159154-01, 06/2007; modules supported by STEP 7 V5.4 SP3.