6ES7 151-3AA22-0AB0
Siemens 6ES7 151-3AA22-0AB0 – IM151-3 PN ST Interface Module
The Siemens 6ES7 151-3AA22-0AB0 is an IM151-3 PN ST interface module that connects an ET 200S station to PROFINET.
Power supply and station capacity
It operates on 24 V DC and has two RJ45 ports. It supports up to 63 modules with a maximum backplane length of 2 metres. Approximate current consumption is 200 mA, with power dissipation of approximately 2 W.
Memory card and device name
The PROFINET device name is stored on a SIMATIC Micro Memory Card. Restoring factory settings does not erase this name. A missing or unsuitable card can prevent communication. Switch off the module’s power before inserting or removing the card.
If the station fails to communicate, compare its assigned device name with the name configured in the PLC project. A correct IP address alone is not enough: the controller identifies the device by name during startup. Resolve any name mismatch before continuing with commissioning. See ET 200 PROFIBUS and PROFINET for more information about network connections.
Replacing AA22 with AA23
Siemens documents the 6ES7 151-3AA23-0AB0 as a compatible replacement for AA22 that can be used without changing the existing project configuration. This requires an AA23 hardware module; installing firmware on an AA22 does not turn it into an AA23.
When selecting a spare, check the complete 6ES7 151-3AA22-0AB0 order number on the label. The “IM151-3” designation is shared by different versions and is not enough to identify the correct replacement.
User manuals and PDF documentation
Visit our Siemens ET 200 user manuals and PDF documentation page for installation, commissioning and diagnostic information. Check that the document covers the AA22 order number before using its instructions.
Related topics
Explore other parts of the ET 200 family through the categories below. These are general product categories; compatibility with a particular station must be checked against each module’s order number.
Input and output modules: Digital inputs · Digital outputs · Analog inputs · Special inputs · Special outputs
Power and connections: Power supply modules · Power distribution modules · Terminal blocks · Connection modules
Functions and expansion: Function modules · Counter modules · Positioning modules · Additional modules · Other network interfaces
Safety and system information: Safety modules · PROFIsafe · About Siemens ET 200
Categories: Siemens › Siemens S7 PLC › SIMATIC S7 › Siemens ET 200