6ES7 134-7SD51-0AB0
Siemens 6ES7 134-7SD51-0AB0 – ET 200iSP 4 AI RTD Pt100/Ni100 Analog Input Module
Siemens 6ES7 134-7SD51-0AB0 is a four-channel RTD analog input module for the SIMATIC ET 200iSP distributed I/O system. It acquires temperatures from resistance thermometers and supports resistance measurement. Part of the ET 200iSP system within the Siemens ET200 family, it makes process measurements available to a PLC or higher-level control system.
Pt100, Ni100 and resistance measurement
The module supports Pt100 and Ni100 resistance thermometers. Changes in the resistance of a Pt100 sensor are converted into temperature using the selected characteristic. 0–600 Ω and 0–1000 Ω ranges are also available for resistance measurement.
The standard temperature ranges are −200 to +850 °C for Pt100 and −60 to +250 °C for Ni100. These are module measurement options; the probe sheath, cable and process connection must also suit the application temperature. When selecting a sensor, assess the operating conditions of the complete probe alongside its Pt100 or Ni100 designation.
The inputs are intended for RTD and resistance measurement. Applications using a thermocouple or a temperature transmitter with a 4–20 mA output require an input module selected for that signal. Measuring the same process temperature does not make these devices electrically interchangeable.
Two-, three- and four-wire sensor connections
Two-, three- and four-wire connections are supported. Configure each channel's measurement method to match the installed wiring. A mismatch between the project setting and the physical connection can make a serviceable probe appear faulty.
During maintenance, review the temperature sensor label, conductor count, cable joints and terminal connections together. When updating an existing installation, recording the original channel settings and retaining clear measurement-point names makes commissioning easier.
Resolution and measurement timing
Resolution is 16 bits including sign. Basic conversion takes 80 ms at 50 Hz or 66 ms at 60 Hz; the datasheet lists a maximum four-channel cycle time of 320 ms. Assess these timings against the response required by the process.
For tank or pipeline monitoring, a constantly changing display does not necessarily provide a more useful measurement. Select filtering with both readability and timely detection of temperature changes in mind. Where the measurement feeds a control loop, review that choice alongside the control program.
Terminal compatibility and station connection
The electronic module plugs into a TM-IM/EM or TM-EM/EM terminal module. Check complete model numbers when reviewing ET200 terminal blocks and connection modules. Terminal arrangements from different ET200 subfamilies should not be assumed interchangeable.
Separately assessing the sensor measurement and the station's industrial communication connection helps fault finding. For an existing ET 200iSP station operating over PROFIBUS, keep a record of the interface and project configuration alongside the channel settings.
Diagnostics and maintenance
The module supports wire-break, short-circuit and group-error diagnostics, together with diagnostic and limit-value interrupts. A red SF indicator displays group errors. Diagnostic functions and limits should be reviewed with the application's channel settings.
When a temperature reading becomes implausible, compare the sensor, wiring and parameters for that same measurement point. On an HMI panel or SCADA screen, showing measurement validity and fault information alongside the numerical value helps maintenance personnel interpret the reading.
Ex application, electrical design and dimensions
6ES7 134-7SD51-0AB0 has Ex(i) protection characteristics. Application suitability depends on the module, sensor, cable and station meeting their relevant certificate conditions together. Ex protection does not assign a SIL functional safety rating to the module.
There is no galvanic isolation between channels; isolation is provided between the inputs and backplane bus. Maximum current consumption is 22 mA, with typical power loss of 0.4 W. Dimensions are 30 × 129 × 136.5 mm, and approximate weight is 230 g.
Replacement selection and technical documentation
For replacement, compare the complete 6ES7 134-7SD51-0AB0 order number on the installed label. Match the terminal type, connected sensors and channel configuration as well. An equal number of analog inputs does not establish equivalent measurement functions.
Use the relevant ET 200iSP documents available through the Siemens ET200 PDF manuals page for connection and parameter details. The Siemens ET200 overview provides further background on the system family.
Related topics
For applications using a separate measuring and control device, browse temperature controllers. Other system components are covered in PLC systems and modules, while general network information is available in the PROFIBUS frequently asked questions.
Editor's note: A correct replacement preserves the sensor characteristic and connection method alongside the module order number. Recording all four channel settings before replacement makes subsequent measurement differences easier to investigate.
More Siemens products: Siemens products | Siemens S7 PLC | SIMATIC S7 | ET200 products