6ES7 953-8LJ11-0AA0
6ES7 953-8LJ11-0AA0 – Siemens 512 KB Micro Memory Card
6ES7 953-8LJ11-0AA0 is a 512 KB SIMATIC Micro Memory Card (MMC) using 3.3 V NFLASH technology. Siemens documentation lists it for S7-300, C7 and ET 200S IM151 CPU systems. Check this memory card against the full order number and firmware version of the intended CPU or interface.
Its role as load memory
In compatible CPUs that use an MMC, the card provides load memory for program blocks and system data. The CPU’s work memory is separate; installing a larger card does not increase it. When assessing CPU requirements or project size, check work-memory demand and the required card storage separately. The IM151-7 CPU requires an MMC to operate.
Do not assess capacity solely by counting visible program blocks. Check the load-memory requirement in the STEP 7 project together with any other data to be stored on the card. Compare full order numbers even when two cards have the same capacity to avoid confusing different versions.
A different role in an ET 200S interface
The manual for IM151-3 PN FO, 6ES7 151-3BB22-0AB0 explicitly lists this card. In this PROFINET interface, an MMC can store the device name. The manual specifies 64 KB for the device name and at least 2 MB for a firmware update via MMC. The 512 KB card therefore has enough capacity for the device name, but not for that interface’s card-based firmware update.
Check the relevant manual before applying this use case to other ET 200 network interfaces. The supported capacity and the card’s function depend on the module.
Card replacement and formatting
Do not format a SIMATIC MMC in Windows. Siemens warns that doing so can make it unusable in an S7 CPU. Use the Siemens tools and procedures specified for the relevant CPU when reading, writing or preparing the card.
For the IM151-3 PN FO, insert or remove the card with the module’s power supply switched off. For CPU systems, consult the model-specific shutdown and card-replacement instructions before making changes. Back up existing contents before starting any erase or download operation.
Inspecting a used card
Confirm 6ES7953-8LJ11-0AA0 and 512 KB on the label. Inspect the contacts and housing, and check whether suitable equipment recognizes the card. A used card may contain a program from another machine; successful reading does not establish that the project suits the intended installation. Compare the project revision and hardware configuration before commissioning.
Editor’s Note: When preparing a spare, record the machine, CPU and project revision alongside the card’s order number. Restoring the correct program matters as much as finding the correct capacity during maintenance. Preserve the contents of the only card from a working machine before using it for troubleshooting or trial changes.
User manuals and PDF documents
Consult Siemens ET 200 manuals for the IM151-7 CPU memory structure and the MMC information in Section 1.3 of the IM151-3 PN FO manual. The S7-300 files section provides a related reference area for CPU and memory checks. The exact card code appears in the order list on page 2-9 of the C7-636 manual.
Related topics
Explore station components through the ET 200 overview, digital input modules, digital output modules, analog input modules and function modules. For field connections, see terminal blocks, connection modules and additional modules. These links provide navigation within the family; they do not establish card compatibility with every module.
Navigation
Siemens ET 200 | Siemens SIMATIC S7 | Siemens automation | OtomasyonAVM home