6ES5 982-3UB11
Siemens 6ES5 982-3UB11 – OP396 Panel Mounting Frame
Siemens 6ES5 982-3UB11 is a mounting frame for installing the OP396 operator panel in a cabinet or control-panel front in the SIMATIC S5 family. This version is supplied without accessories for adapter installation. When buying a Siemens panel, establish separately whether the frame, operator panel and adapter are included.
The Siemens OP396 manual lists 6ES5 983-0UA11 as the mounting option with adapter installation accessories. Check this distinction when an 6ES5 984-2UA11 or 6ES5 984-2UB11 adapter and power pack is required. Identify S5 supplementary hardware by its complete order number and intended installation.
The Siemens PG615 manual also lists 6ES5 982-3UB11 as a complete frame for cabinet installation in its C-2 spare-parts table. Compare the actual device arrangement and supplied parts with the relevant manual.
Panel cutout and installation
The manufacturer specifies a 259 × 163 mm front-panel cutout for OP396 installation with the mounting kit. When planning the PLC and HMI layout, check orientation, rear clearance and connector access against the actual panel. Complete this dimensional check for the S5 installation before cutting the enclosure.
IP54 installation condition
Siemens specifies IP54 for the OP396 flush-mounted in a cabinet with the mounting frame. This rating concerns the installed panel arrangement. During S5 maintenance, inspect the seating surface, sealing components and retaining hardware together.
Cable access and functional checks
During installation, check that cables and connectors remain free from pinching, that interface connections remain accessible and that any power supply hardware is positioned correctly. Leave sufficient room to avoid forcing cables into sharp bends behind the panel.
After installation, check the display, keys, communication and intended machine function. If troubleshooting is required, inspect connections disturbed during installation first. Confirm the expected interaction with the PLC program under controlled conditions.
Distinguishing other panel accessories
6ES5 982-3UA11 is a separate order number. Check mechanical fit individually for OP393, OP395 and OP396 panels. The 6ES5 986-0MA11 carrying case serves a different purpose from fixed cabinet mounting.
When purchasing S5 supplementary equipment, review the full order number, photographs of the actual part and the retaining hardware included. Inspect used frames for cracks, distortion and additional holes made after manufacture.
Editor’s Note
When buying a used Siemens part, establish exactly what the price includes if the photographs show a panel inside the frame. Identify the frame separately from a complete OP396 assembly. Check the retaining parts before the item reaches the workshop.
Check the dimensions twice before cutting the enclosure. The manual’s 259 × 163 mm dimension describes the panel opening for installation with the mounting kit. Compare the actual frame, panel and intended orientation.
Inspect the frame on a flat surface. Check corners, seating surfaces and screw locations for cracks, distortion or signs of excessive force. Investigate movement when a key is pressed before tightening the assembly further.
Inspect sealing and seating as part of the installation check. Correct dirt, missing sealing components or uneven contact before completing the assembly. Avoid using excessive tightening force to compensate for a distorted surface.
Close the cabinet door and check that the cables remain free from tension. Recheck the display, keys and communication. Record the frame order number and completed checks in the maintenance notes.
OtomasyonAVM resources
+ 6ES5 982-3UB11 model page · 6ES5 396-0UA11 / OP396 · Siemens S5 second-hand models · Siemens operator panels.
Related topics
+ 6ES5 982-3UA11 · OP393 · OP395 · 6ES5 984-2UA11 · 6ES5 986-0MA11. These links help distinguish panels and accessories; they do not establish direct interchangeability.
Browse SIMATIC S5
+ Siemens panels and HMI · S5 cables and connectors · S5 function and supplementary hardware · SIMATIC S5 · Siemens second-hand main page.
Siemens and external references
+ Siemens OP396 operating instructions, EWA 4NEB 810 1288-02a, English. Section 2.1 / printed page 2-2: cutout with mounting kit; section 2.4 / printed page 2-5: IP54 and frame options; Table 15-1 / printed page 15-1: complete order numbers.
+ Siemens PG615 manual, 6ES5 998-0UR11, German. Appendix C, printed page C-2: 6ES5 982-3UB11 cabinet mounting frame entry.