6ES5 946-3UA23
Siemens 6ES5 946-3UA23 – S5-155U CPU 946 BSU Processor Module
Siemens 6ES5 946-3UA23 is the Bit Slice Unit (BSU) of the S5-155U CPU 946/947 processor assembly in the SIMATIC S5 family. CPU 946 handles instruction execution, arithmetic/logic and addressing. This S5 processor module works together with CPU 947, which contains the memory and communication sections.
Siemens describes CPU 946/947 as an assembly comprising two separate plug-in central processing units. Therefore, 6ES5 946-3UA23 alone does not constitute a complete CPU 946/947 assembly. Check the CPU 947 order number, hardware version, rack arrangement and existing power supply when selecting a replacement.
Where is the 128 KB user RAM?
The CPU 946/947 assembly has 64 Kwords, equivalent to 128 KB of basic user RAM, physically located on CPU 947. Suitable 355 memory expansion hardware and RAM/EPROM submodules allow a total user-memory configuration of up to 896 KB. This maximum requires the appropriate additional hardware.
Record CPU 946, CPU 947 and any expansion memory separately during maintenance. CPU 948 uses a different processor architecture; its memory capacity and interface specifications should not be applied directly to CPU 946.
STEP 5 program execution
CPU 946/947 uses STEP 5 programming with LAD, CSF and STL representations. GRAPH 5 can also be used for sequential control applications. Check the programming software, project files and function blocks against the installed system version.
The assembly supports cyclic, time-controlled and interrupt-driven execution. The Siemens product summary specifies an average processing time of 1.4 ms for 1 K binary instructions; this is not a fixed machine-cycle time for every application. 256 timers, 256 counters, 2048 flag bits and 32768 S flag bits are resources of the CPU 946/947 assembly.
Programming connection and I/O checks
The PG programming connection is made through the CPU 947 front connector or a suitable PG-MUX arrangement. Select the programming cable and interface hardware accordingly. Check communication modules and connected equipment against the existing project and bus configuration.
During replacement, verify the addresses of the digital input, digital output and analog modules against the project. Distinguish the CPU 946 processing function from the channel counts and electrical signal characteristics of the field I/O modules.
Supply and 3UA23 version checks
The Siemens technical table specifies a 5 V DC ±5% supply and approximately 6 A current consumption for CPU 946. CPU 947 consumption must be included separately. Check supply capacity against all rack loads; this rating does not describe an external supply connection on the CPU front panel.
The manual provides separate jumper drawings for 6ES5 946-3UA21 and 6ES5 946-3UA22. Figure 4-5 applies to 6ES5 946-3UA23. Record CPU 947 versions such as 6ES5 947-3UA21 and 6ES5 947-3UA22 by their complete labels as well. Similar order numbers alone do not establish interchangeability.
Editor’s Note
When buying a used Siemens processor, establish whether the delivery includes CPU 946 only or a CPU 946/947 assembly. Request complete labels and board photographs. Remember that the user RAM is located on CPU 947 when reviewing a listing described simply as a “128 KB CPU”.
Before dismantling a working system, back up the program, data blocks and machine-specific settings. Record the CPU 947 memory and any 355 expansion hardware. Confirm that a current project is available before an overall reset or memory removal.
Include the CPU 946 load of approximately 6 A when checking the rack supply and connectors. Investigate discoloured contacts, poor seating and heat damage. Correct supply faults as part of maintaining the S5 system.
Use the jumper drawing for the exact hardware version. Photograph the existing positions before making changes. Establish the operating mode and interrupt configuration before adjusting any permitted jumper.
Switch off rack power before removing or inserting modules. After installation, use the PG to check diagnostics, startup behaviour and I/O addresses, then perform a controlled machine test. Record both CPU order numbers, versions and the backup filename for the next technician.
OtomasyonAVM resources
+ 6ES5 946-3UA23 model page · Siemens S5 second-hand models · SIMATIC S5 CPU models · S5 memory cards.
Related topics
+ 6ES5 946-3UA21 · 6ES5 946-3UA22 · 6ES5 947-3UA21 · 6ES5 947-3UA22. These links support version and function comparison; they do not confirm direct replacement compatibility or a matched processor pair.
Browse SIMATIC S5
+ S5 racks · S5 power supplies · S5 cables and connectors · S5 communication modules · Siemens second-hand main page.
Siemens and external references
+ Siemens S5-155U CPU 946/947 manual, English. 6ES5 998-0UM22, Release 07; CPU hardware section C79000-B8576-C532-06. Printed pages 1-1–1-7: architecture, memory and technical data; 2-1: installation; 4-6, Figure 4-5: exact 6ES5 946-3UA23 jumper layout.