6ES5 921-3UA12
Siemens 6ES5 921-3UA12 – S5-135U CPU 921 S Processor
Siemens 6ES5 921-3UA12 is the CPU 921 S processor for SIMATIC S5-135U. It is designed particularly for binary control and machine sequencing tasks. It supports 7.4 KB of integrated DB-RAM and a plug-in RAM/EPROM user memory of up to 64 KB. When maintaining Siemens, Siemens S5 and SIMATIC S5 equipment, record the full reference, revision and installed memory submodule together.
6ES5 921-3UA11 is another reference in the CPU family; verify replacement suitability for the installed application. 6ES5 922-3UA11 is the R processor designed for word processing. Compare program instructions, memory configuration and operating requirements when selecting a processor.
Memory and Program Resources
The 7.4 KB DB-RAM is integrated data memory; check the capacity of the separate RAM/EPROM user memory submodule as well. CPU 921 provides 2048 flag bits, 128 timers and 128 counters. Include the central controller’s backup arrangement in maintenance checks when the program is stored in RAM.
Rack Position and Multiprocessor Operation
The manufacturer’s CPU 921 layout places a single processor in position 11. Multiprocessor configurations use positions 11/27/43/59 consecutively from the first position. Check the installed S5 rack and chassis drawing together with the 923A coordinator or 923C coordinator arrangement. Include the DB1 address lists in the maintenance records for multiprocessor operation.
PG Connection and STEP 5
The CPU has a 15-pin serial PG connection; its front connector table identifies 20 mA transmitter/receiver connections. The 3UA12 version supports online programmer access through a suitable 923C arrangement. Verify the installed S5 interface modules and S5 cables/connectors against the wiring diagram.
Back up the STEP 5 program and system data before PLC programming or board replacement. During debugging, review the symptoms preceding STOP, diagnostic records and the state of the communication modules together. Preserve a backup before performing an overall reset.
Electrical Data and Spare Selection
The manual specifies a 5 V system supply, typical consumption of 3 A, an operating temperature of 0–55 °C and an approximate weight of 0.5 kg. Check the S5 power supply and rear connector contacts. Switch off the central controller before removing or inserting the CPU.
When considering other CPUs such as 6ES5 928-3UA12, 6ES5 928-3UB12 and 6ES5 928-3UB21, assess program adaptation and hardware suitability separately. Browse S5 function modules and the Siemens S5 PLC overview when reviewing the installed system components.
Editor’s Note
Keep the 7.4 KB and 64 KB figures separate: integrated data memory and maximum plug-in user memory. Check the label of the memory submodule supplied with the CPU.
Back up the running program and data blocks first. Avoid starting with an overall reset when the CPU enters STOP; diagnostic evidence may be lost.
On a multiprocessor machine, record the coordinator, CPU order and DB1 address lists together. Check the state of the other processors as well.
If programmer access fails, inspect the 15-pin connector, correct 20 mA cable and any 923C connection arrangement before judging the CPU faulty.
Check RAM backup and supply condition. Remove or insert the board with power off and assess it in a suitable rack with the program backup available. A RUN indication alone does not verify the complete application.
Documentation and PDF Archive
Browse further S5 documents in our S5-115 PDF archive. For CPU 921, use the product summary, S processor and programming sections of the S5-135U manual below.
Related Topics and Nearby Models
6ES5 921-3UA11 · 6ES5 922-3UA11 · 6ES5 928-3UA12 · 6ES5 928-3UB12. These models are listed for comparison; direct replacement suitability requires separate verification.
Siemens S5 Navigation
Used Siemens products · Siemens S5 main page · S5 function modules · Memory cards · Racks and chassis · Cables and connectors
External References
Siemens S5-135U CPU 921/922 Manual, German – 6ES5 998-0UL12: product summary; S-Prozessor 921, §1.5 technical data and §2.2 installation positions.
Siemens S5-135U CPU 921/922 Manual, English – 6ES5 998-0UL22: PDF 14 product summary; PDF 126 application; PDF 131 technical data; PDF 138 front connector assignments.