6ES5 300-5LB11
Siemens 6ES5 300-5LB11 — IM 300-5L Centralized Expansion Interface
The Siemens 6ES5 300-5LB11 is an IM 300-5L interface installed in the central controller to connect up to three ER 701-1 expansion racks through IM 306 modules in SIMATIC S5 systems. It carries 5 V power alongside the backplane signals. This version of the S5 interface module has a maximum permissible current of 2 A per connection.
Each ER 701-1 connected to a suitable central Siemens S5 PLC uses an IM 306 — 6ES5 306-7LA11. Record rack numbers such as 6ES5 701-1LA11 and 6ES5 701-1LA12, installed modules and the cable sequence together. The Siemens S5-135U/155U manual explicitly lists this pairing.
705 cables and the 2.5-metre total limit
The connection uses shielded 705-series cables. Relevant S5 cables and connectors include the 705-0AF00: 0.5 m, 705-0BB20: 1.25 m, 705-0BB50: 1.5 m and 705-0BC50: 2.5 m. The IM 300-5L instructions specify a maximum total cable length of 2.5 m; include every intermediate cable segment in that total.
5 V supply, 50 mA consumption and 2 A current limit
The internal supply is 5 V ±5%, and the module’s own maximum current consumption is 50 mA. This consumption is separate from the current carried to the expansion racks. Check both the 2 A limit at each connection and the central power supply’s total capacity; adding another rack does not create an independent 2 A supply allowance.
Include the 5 V demand of the digital inputs, digital outputs and analog modules in the calculation. Place the expansion rack with the highest current demand closest to the central controller to reduce cable voltage drop. Expansion units in this arrangement receive their operating supply through the interface connection.
Addressing and differences between IM 300 versions
Expansion I/O addresses must not overlap addresses already used in the central controller. Match the IM 306 slot settings to the PLC program. Record the existing address panel and the IM 300 jumper positions before replacement to help restore the original arrangement.
The 6ES5 300-5CA11 connects suitable EU 184U/187U racks through an IM 312-5 and permits 5 A per connection. The 6ES5 300-3AB11 uses an IM 312-3 in a different rack arrangement. Keep the 300-5LB11’s ER 701-1/IM 306 pairing and 2 A limit distinct from those versions.
Installation, protection and connection checks
The module is rated IP20, with an operating temperature of 0–55 °C and an approximate weight of 0.25 kg. Isolate power before installation or removal. Inspect rack protective grounding, cable shielding and connector contacts. Unused connectors in this connection arrangement do not require terminators.
Editor’s note
This board’s role becomes clearer when you look at both ends. There is an IM 300-5LB11 in the central controller, but which IM 306 modules and cables complete the connection? A small sketch of the arrangement makes choosing a spare much easier.
Take the time to read the complete label. The 300 family number alone is insufficient; the 5LB11 suffix matters here. Comparing the full code and connectors first is easier than discovering the mismatch at the cabinet.
Because the IM 300 also carries power in this arrangement, a fault may involve more than data transfer. If modules have been added to the last rack, revisit the load calculation. A longer cable does not provide any extra supply capacity.
During troubleshooting, resist changing several boards together. Record which expansion unit disappears and whether the fault follows loading or cable movement. A few useful notes can tell you more than a pile of unnecessarily removed boards.
When buying a used Siemens IM 300-5LB11, request clear photographs of the board, jumpers and connectors as well as the label. Where possible, arrange an access test using a suitable central rack, IM 306 and known I/O modules. Physical fit alone is insufficient evidence of a healthy connection.
OtomasyonAVM resources and PDFs
+ OtomasyonAVM S5 PDF archive. Consult the manufacturer documents below for this module’s ER 701-1 and IM 306 connection.
Related topics
+ 306-7LA11 partner module · ER 701-1 rack · 705-0AF00 cable · 300-5CA11 · 300-3AB11 · PLC troubleshooting.
Browse SIMATIC S5
+ S5 interface modules · S5 cables · SIMATIC S5 · Siemens S5 PLCs · Siemens second-hand main page.