Telemecanique XBT Communication and Transfer Cables

Telemecanique XBT Communication and Transfer Cables belongs to HMI, industrial-PC or operator-interface hardware. The 34 technical references or proven groups below are separated by real differences in the complete order code.

Do not stop at the frame or family prefix. Confirm supply, I/O or interface role, feedback, software/firmware and connected-equipment class against the complete reference.

Shared family context: The terminal-side COM/USB connector and controller-side connector must both match; similar XBTZ numbers are not interchangeable.

Panel and reference differences

XBTZ908 — 1.8 m serial cable used through XBTZG909 between an XBT/HMIGTO COM port and TSXSCA62/64 Uni-Telway or Modbus subscriber box

XBTZ915 — 2.5 m RS-232C cable from XBTGT COM1 to a serial printer with 25-way female SUB-D

XBTZ918 — serial cable from XBT/HMIGTO to the 25-way SUB-D interface of TSXSCY2160 communication module

XBTZ925 — USB application-transfer cable between an XBTGT panel and a PC USB port

XBTZ926 — PC-to-XBT application-transfer lead; connector set is selected for the legacy terminal programming port

XBTZ938 — serial connection cable from XBT/HMIGTO to RJ45 devices such as TeSys U or Altivar drives

XBTZ945 — legacy XBT serial communication lead for a controller terminal/serial port connection

XBTZ968 — RS-485 cable from an XBT/HMIGTO serial port to the 8-way mini-DIN TER port on TSX Micro

XBTZ980 — legacy XBT application/communication lead for the documented terminal and controller connector pair

XBTZ988 — RS-232C cable from XBT/HMIGTO to the HE13 connector used by Modicon STB

XBTZ3002 — set of 12 spring fixing clips for panel mounting XBTGT terminals

XBTZ3004 — panel fixing hardware set; clip count and cut-out must match the terminal enclosure

XBTZ9008 — 2.5 m RS-485 Modbus cable from XBT/HMIGTO to the RJ45 LU9GC3 splitter box

XBTZ9018 — 2.5 m serial cable from XBT/HMIGTO COM1 to an 8-way mini-DIN Twido/Nano terminal port

XBTZ9680 — RS-485 cable with 8-way mini-DIN automation-product end for Premium/TSXPACC01 connection

XBTZ9681 — RS-485 cable with 8-way mini-DIN end for Modicon Premium terminal-port connection

XBTZ9686 — 2.5 m angled-connector member of the XBTZ968x RS-485 mini-DIN cable family

XBTZ9687 — 20 m member of the XBTZ968x RS-485 mini-DIN cable family

XBTZ9688 — 25 m member of the XBTZ968x RS-485 mini-DIN cable family

XBTZ9710 — RS-232C cable from XBT/HMIGTO to a 9-way SUB-D Modicon Quantum interface

XBTZ9711 — RS-232C cable from XBT/HMIGTO to an RJ45 Modicon Momentum M1 interface

XBTZ9715 — RS-232C cable from XBT/HMIGTO to the HE13 interface used by Twido

XBTZ9720 — RS-485 cable from XBT/HMIGTO to a 25-way SUB-D Mitsubishi Q/Melsec interface

XBTZ9721 — RS-485 cable from XBT/HMIGTO to Siemens S7 PPI/MPI serial interface

XBTZ9730 — RS-232C cable from XBT/HMIGTO to Rockwell DF1 Full Duplex equipment

XBTZ9731 — RS-232C cable from XBT/HMIGTO to Mitsubishi A-Link/Melsec 25-way SUB-D interface

XBTZ9732 — RS-485 cable from XBT/HMIGTO to Rockwell MicroLogix DH-485 RJ45 interface

XBTZ9733, XBTZ9734 — serial cable variant for the controller connector identified in the XBT third-party PLC table

XBTZ9740 — RS-485 cable from XBT/HMIGTO to Omron CQM1/CVM1/Sysmac 9-way SUB-D interface

XBTZ9743 — serial cable variant for an Omron/third-party controller interface in the XBT connection table

XBTZ9780 — 2.5 m serial cable from XBT/HMIGTO to an 8-way mini-DIN TSXPACC01 connection box

XBTZ9782 — serial cable from XBT/HMIGTO to an 8-way mini-DIN Schneider controller/connection-box interface

XBTZ9980 — RS-485 cable from XBT/HMIGTO to RJ45 Modicon M340/M238/M258 or drive-side serial interface

XBTZ9982 — serial cable from XBT/HMIGTO to the Schneider controller interface listed with TSXSCA/M340 connections

Manual and related-product path: Telemecanique HMI and Operator Panel Manuals · Telemecanique HMI Panels.

Before replacement or ordering, check the complete label, electrical class, connector/terminal arrangement and project backup together. A similar name or enclosure alone does not prove compatibility.