Telemecanique Files
Telemecanique Files is the starting point for identifying legacy Telemecanique and later Schneider Electric automation families. It separates control, visualization and motion hardware so a familiar brand mark does not lead to the wrong product class.
Use the complete front and side label first. Family prefix, full order code, hardware revision, supply, installed option, firmware and engineering software together determine which technical path is useful.
Choosing the right subfamily
Choose servo drives for the electronic power and control unit, servo motors for torque-producing motor hardware, and servo accessories for cables, filters, resistors and interface modules.
HMI panels covers operator terminals, while PLC modules and accessories distinguish CPUs, I/O, racks, power and communication hardware. Motion controllers that coordinate axes remain a separate control layer.
When a replacement spans generations, record the existing project, wiring, network settings and option modules before comparing dimensions or nominal ratings. A later Schneider family may be a migration route, but it is not automatically a drop-in substitute.
Use the relevant manual centre only after the product class and generation are known; document codes guide selection.