Schneider Electric BSH
Schneider Electric BSH belongs to servo-motor hardware. The 22 technical references or proven groups below are separated by real differences in the complete order code.
Do not stop at the frame or family prefix. Confirm supply, I/O or interface role, feedback, software/firmware and connected-equipment class against the complete reference.
Shared family context: 55 mm flange, stack length 1; low-inertia BSH. 0.5 Nm continuous and 1.5 Nm peak torque; 9,000 rpm maximum mechanical speed. T winding class with Lexium 32 drive pairing; the full suffix defines shaft, SinCos Hiperface encoder, brake, protection and connector. P winding class with Lexium 32 drive pairing; the full suffix defines shaft, SinCos Hiperface encoder, brake, protection and connector. 55 mm flange, stack length 2; low-inertia BSH. 0.8 Nm continuous and 2.5 Nm peak torque; 9,000 rpm maximum mechanical speed. The complete suffix defines shaft, SinCos Hiperface encoder, brake, protection and connector selection.
Motor differences
BSH0551T —
BSH0551P —
BSH0552T —
BSH0552P —
BSH0553P — 55 mm flange, stack length 3; low-inertia BSH. 1.05 Nm continuous and 3.5 Nm peak torque; 9,000 rpm maximum mechanical speed.
BSH0553T — 55 mm flange, stack length 3; low-inertia BSH. 1.2 Nm continuous and 3.3 Nm peak torque; 9,000 rpm maximum mechanical speed.
BSH0701T — 70 mm flange, stack length 1; low-inertia BSH. 1.3 Nm continuous and 3.5 Nm peak torque; 8,000 rpm maximum mechanical speed.
BSH0701P — 70 mm flange, stack length 1; low-inertia BSH. 1.4 Nm continuous and 3.5 Nm peak torque; 8,000 rpm maximum mechanical speed.
BSH0702T — 70 mm flange, stack length 2; low-inertia BSH. 2.2 Nm continuous and 7.2 Nm peak torque; 8,000 rpm maximum mechanical speed.
BSH0702P — 70 mm flange, stack length 2; low-inertia BSH. 2.2 Nm continuous and 7.6 Nm peak torque; 8,000 rpm maximum mechanical speed.
BSH0703T — 70 mm flange, stack length 3; low-inertia BSH. 2.6 Nm continuous and 7.4 Nm peak torque; 8,000 rpm maximum mechanical speed.
BSH0703P — 70 mm flange, stack length 3; low-inertia BSH. 3.1 Nm continuous and 11.3 Nm peak torque; 8,000 rpm maximum mechanical speed.
BSH1001T — 100 mm flange, stack length 1; low-inertia BSH. 2.7 Nm continuous and 7.5 Nm peak torque; 6,000 rpm maximum mechanical speed.
BSH1001P — 100 mm flange, stack length 1; low-inertia BSH. 3.3 Nm continuous and 9.6 Nm peak torque; 6,000 rpm maximum mechanical speed.
BSH1002T — 100 mm flange, stack length 2; low-inertia BSH. 5.8 Nm continuous and 16.4 Nm peak torque; 6,000 rpm maximum mechanical speed.
BSH1002P — 100 mm flange, stack length 2; low-inertia BSH. 5.8 Nm continuous and 18.3 Nm peak torque; 6,000 rpm maximum mechanical speed.
BSH1003P — 100 mm flange, stack length 3; low-inertia BSH. 8 Nm continuous and 28.3 Nm peak torque; 6,000 rpm maximum mechanical speed.
BSH1004P — 100 mm flange, stack length 4; low-inertia BSH. 10 Nm continuous and 37.9 Nm peak torque; 6,000 rpm maximum mechanical speed.
BSH1401P — 140 mm flange, stack length 1; low-inertia BSH. 11.1 Nm continuous and 27 Nm peak torque; 4,000 rpm maximum mechanical speed.
BSH1402T — 140 mm flange, stack length 2; low-inertia BSH. 19.5 Nm continuous and 59.3 Nm peak torque; 4,000 rpm maximum mechanical speed.
BSH1403T — 140 mm flange, stack length 3; low-inertia BSH. 27.8 Nm continuous and 90.2 Nm peak torque; 4,000 rpm maximum mechanical speed.
BSH1404P — 140 mm flange, stack length 4; low-inertia BSH. 33.4 Nm continuous and 103.6 Nm peak torque; 4,000 rpm maximum mechanical speed.
Manual and related-product path: Telemecanique Servo Motor Manuals · Telemecanique Servo Motors · Schneider Electric Lexium 32C.
Before replacement or ordering, check the complete label, electrical class, connector/terminal arrangement and project backup together. A similar name or enclosure alone does not prove compatibility.