IC693CBL331 Overview and Connection Details

    Left Side: Features two 24-pin, 90-degree connectors.
    Cable Length: 1.0 meter (approximately 39.37 inches).

I/O Cables and Application

This cable is required for 32-point modules. The supported modules include:

   IC694MDL654, MDL655, MDL752, MDL753.

Prefabricated I/O Cables:

   The catalog numbers for prefabricated I/O cables are:

   IC693CBL327, CBL328, CBL329, CBL330, CBL331, CBL332, CBL333, CBL334.

Terminal Block:

   This cable is compatible with the IC693ACC337 terminal block for 32-point modules.

Custom Cables:

   If needed, you can create custom cables tailored to your specific requirements.

Important Features of the Cables:

   CBL327 and CBL328: Have a right-angle 24-pin connector (Fujitsu FCN–365S024–AU) on one end and stripped wire ends on the other.

   These cables are 10 feet (3 meters) long.

   All other cable types have Fujitsu FCN–365S024–AU connectors on both ends and are wired pin-to-pin (e.g., pin A1 to pin A1, pin A2 to pin A2, etc.).

   Each pin has a current rating of 1.2 Amps.

Connector Depth:

   Prefabricated I/O cables extend 2 inches out from the face of the modules to which they are connected. The depth of the cabinet in which the PLC is installed should accommodate this 2-inch extension due to the connector.

Conclusion:

   This setup ensures reliable cabling for 32-point modules and provides a secure wiring solution for industrial environments.

>> IC693CBL331 Data cables User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc