The IC693CBL323 cable has been discontinued and replaced by the IC693CBL333 and IC693CBL334 cables. This 1.5 feet (0.5 meter) I/O cable connects a 24-pin connector on a module to the connector on a terminal block. It is used with Terminal Block Quick Connect (TBQC) assemblies. For additional information and module lists, refer to Appendix J.

The IC693CBL333 is the replacement for the IC693CBL323. It is a 20-inch (0.5 meter) right-angle I/O cable that connects the left 24-pin connector on a 32-point module to the terminal block.
Connector Depth:

The following illustration shows the space required in front of the PLC when this cable is connected to a module. The depth of the cabinet where the PLC is mounted should accommodate the depth added by this connector.

    Connector depth: 2.187 inches
    Typical depth: 1.5–2.5 inches

These dimensions must be considered to ensure sufficient clearance in front of the module when the cable is connected.

+  IC693CBL323 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc