• Your shopping cart is empty!

IC693CPU311

CPU311 Catalog Number IC693CPU311

POWER 1 2 3 4 5
BASE 5-SLOT
USER PROGRAM

PROGRAMMABLE CONTROLLER
SYSTEM PROM PROGRAM PROM
CAUTION SUPPLY AND REGISTER VALUES MAY BE LOST IF POWER SUPPLY IS REMOVED FOR LONGER THAN 1 HOUR WITH CPU

Technical Specifications:

  • CPU Type: 5-slot baseplate with embedded CPU
  • Total Baseplates per System: 1
  • Power Supply Load: 410 milliamps from +5 VDC supply
  • Processor Speed: 10 MegaHertz
  • Processor Type: 80188
  • Operating Temperature: 0 to 60 degrees C (32 to 140 degrees F) ambient
  • Typical Scan Rate: 18 milliseconds per 1K of logic (boolean contacts)
  • User Program Memory (maximum): 6K Bytes
  • Discrete Input/Output Points: 160 points (maximum - combined inputs + outputs)
  • Discrete Global Memory: 1280 bits
  • Internal Coils: 1024 bits
  • Output (Temporary) Coils: 256 bits
  • System Status References: 128 bits (%S, %SA, %SB, %SC - 32 bits each)
  • Register Memory: 512 words
  • Analog Inputs: 64 words
  • Analog Outputs: 32 words
  • System Registers: 16 words (%SR)
  • Timers/Counters: 170
  • Shift Registers: Yes
  • Built-in Serial Ports: 1 (uses connector on PLC power supply). Supports SNP and SNP-X slave protocols.
  • Communications: Supports LAN multidrop, Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.
  • Override: No
  • Battery Backed Clock: No
  • Interrupts: No
  • Memory Storage Type: RAM and optional EPROM or EEPROM
  • PCM/CCM Compatibility: No

General Explanation:

This CPU may seem simple, but it's full of surprises! Whether embedded or modular, the key is choosing the right one to keep your system running smoothly and efficiently.

>> IC693CPU311 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CPU311 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013    

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."  

Your shopping cart is empty!

Continue