Emec

Used EMEC Dosing, Measurement and Control Products
Browse second-hand EMEC products in this section. EMEC specialises in chemical dosing, water treatment, disinfection and related measurement and control solutions. Its portfolio includes different metering pumps and instruments for parameters such as pH, ORP / redox and conductivity. Supported measurements and functions vary by model; refer to the documentation for the complete product code.
You may need a device to transfer liquid, meter a chemical or control dosing in response to a measurement. These are different tasks. Our general pump category and control devices help you explore related product families; sharing a category does not establish direct interchangeability.
Which specifications matter for an EMEC product?
Flow and pressure: Do not assess a metering pump solely by its litres per hour rating. Check the corresponding backpressure, adjustment range and application requirements together. The factors involved in pump selection extend beyond motor power or external dimensions.
Chemical compatibility and included parts: The materials of the pump head, diaphragm, seals, valves and tubing must suit the chemical and operating conditions. Check whether the suction line, injection valve, fittings and other required parts are included. When reviewing pump accessories, assess connection and material compatibility separately.
Measurement input and probe condition: The presence of a pH electrode, ORP probe or conductivity sensor does not establish reliable measurement. Usage and storage history, calibration information and test scope matter. Understanding pH control and assessing a particular probe's suitability are separate tasks. Sensors and any temperature measurement probe must match the device's supported types and ranges.
Control and communication: Check for pulse inputs, 4–20 mA, relay outputs or RS485 / Modbus on the specific model. An analog signal controller is not automatically a replacement for an analyser connected directly to a pH electrode. For PLC and HMI or SCADA integration, assess signal type, scaling and communication details separately.
Electrical compatibility: Assess the supply voltage, output load ratings and alarm connections against the documentation. System relays, contactors and fuses must also suit the circuit requirements. This general information is not a wiring, chemical dosage or configuration recommendation for your application.
Who should you contact about a product?
Your contact for each product is the store identified on its product page. Contact that store to confirm availability, physical condition, included accessories, test coverage and sales terms. This brand page provides general information and navigation; it does not establish that a particular item is available or suitable for your application.
Technical support and consultancy: We do not provide installation, parameter configuration, programming, commissioning or application consultancy for the second-hand EMEC products in this section. Product sales information and assistance with adapting a controller to your machine are different services. Have your own qualified technical personnel assess suitability using the product documentation.
Test information, condition and warranty
Read the product description and any available test information carefully. A statement that a device has been tested does not establish that every input, output and operating scenario has been checked. Refer to the stated test scope and assess missing accessories, visible damage and disclosed faults before purchasing. Do not assume that the existing parameter settings are suitable for your application.
This section may occasionally include faulty, incomplete or parts-only devices, with their condition disclosed. Assess these separately from working units. We do not offer a commercial warranty for products in this second-hand section; unused or boxed condition does not mean that an item is sold with a new-product warranty. Obtain the applicable sales terms from the store responsible for the product.
Stock information: There may be a delay between a sale and the stock record being updated. Confirm the available quantity and supply status with the product's store before ordering. An out-of-stock second-hand model is not guaranteed to become available again.
Browse by category and compare new options
If the item is not listed here, visit our second-hand models main page. Products are grouped by category and function rather than by brand. You can also explore related devices under used pump controllers. This category does not imply that every listed device is a chemical metering pump.
Second-hand does not always mean lower cost. If an exact replacement is not essential, compare new control devices, signal processing products and pump options relevant to your application. A general water pump is not a direct replacement for a chemical metering pump, nor is a general indicator a replacement for a pH analyser. Check each new product's warranty, documentation and support terms on its page and with its selling store.
Do you have EMEC products to sell?
If you own EMEC or other industrial automation equipment that you wish to sell, email otomasyonavm@gmail.com. Include the brand and complete model code, quantity, known condition, clear photographs of the label and equipment, any available test information and your asking price. We do not purchase products without an invoice. Please state whether you can issue an invoice for the sale. Sending an enquiry does not constitute a commitment by us to purchase the equipment.
EMEC CDDIN 0X00G431SW0
EMEC CDDIN 0X00G431SW0 is a process measurement/control unit. It is used in process monitoring, conv..
162.00USD Ex Tax: 162.00USD
