Used Allen-Bradley Servo Motors and Drives

Browse used Allen-Bradley servo motors and servo drives in this section. The brand's motion control portfolio includes the Kinetix family. A servo system requires the motor, drive, feedback and controller to be assessed together. A matching brand or power rating alone does not establish compatibility.

Matching the motor and drive

Identify the complete catalog numbers of both the motor and drive. Compare rated speed, continuous and peak torque, current characteristics and the drive's supported motor options using the relevant documentation. Mechanical requirements also include flange dimensions, shaft configuration and any brake specifications. A similar housing or matching connector does not establish replacement compatibility.

Check the drive's command interface and communication requirements against the existing PLC or controller. Depending on the model, hardware revision, firmware and project software also form part of the compatibility assessment. Access product documentation through the manufacturer's official motion control page.

Feedback and cables are part of the system

Verify the feedback type, power connections and cable compatibility separately. A cable fitting mechanically does not establish suitability; its connection arrangement must match the drive and motor combination. Power, feedback and any brake connections can differ between product families. Check the model details of the associated cables and accessories as well.

Test information, condition and availability

Read any test description specific to the listed item. Drive power-up, communication checks, unloaded motor operation, feedback checks and brake checks cover different aspects of a system. One test does not verify every function and operating condition. Faulty equipment is sold with its faults stated in the description. Review the listing for physical condition and missing parts as well.

For stock, pricing, condition, test scope and delivery, contact the store identified on the product page. Include the product link and complete model code. Inventory is updated approximately every 10 days, so sold items may remain listed as in stock for a short time. Confirm availability before ordering.

Used equipment sales terms

We do not provide technical support or application advice for these products. No additional commercial warranty is offered for equipment in the used section, including unused or boxed units. OtomasyonAVM is not an Allen-Bradley representative. Visit our About Allen-Bradley page for brand information.

Offer your servo equipment to us

Send the model codes, quantities, condition, photographs and asking prices set by you to otomasyonavm@gmail.com. We review equipment purchase offers; we do not buy equipment without an invoice. This section does not accept third-party listings.

Other used equipment and new alternatives

The Used Models page groups products by equipment category rather than brand. Browse used servo drives and related PLC CPUs, HMI terminals and power supplies from different manufacturers by category.

A used servo product can cost more than a suitable new alternative. Explore new motion control equipment, operator terminals, power supplies, sensors and controllers. AC drives and drive accessories can be considered for different motor control requirements. Do not assume that a standard variable frequency drive can replace a servo drive; assess system compatibility and total replacement cost when comparing alternatives.