M18 connector type PNP NO

Dear friends,
In
this section, you can find our Metric 30, NO (normally open contact),
and PNP (positive output) metal-sensitive models with connector options.
These products provide a positive output when they detect metal.
Please pay attention to the following features when making your selection:
a. Power supply voltage (AC/DC) (AC 220V sensors )
b. Mounting dimensions (metric mm or square body)
c. Detection distance (in mm)
d. Mechanical structure (short/long body, straight or angled head)
e. Output type (NPN/NPN) (NPN vs PNP which model should I choose?)
f. Contact type (NC/NO) (normally open/closed)
g. Cable system (self-wired or connector)
h. Operating frequency (this is very important. We do not have low-frequency inductive sensors in our store. Our sensors operate at 2 kHz and can be used easily in applications such as counters, tachometers, PLCs, smart relays, etc.)
Physical similarity does not mean anything in our inductive sensor
models. Each product order number contains codes for the above-listed
features. Additionally, you can check out similar products such as thermal types and SSR relays.
Should I choose NPN or PNP output sensors?
Our website has more NPN sensors because NPN (-output signal) sensors are more compatible with field conditions. They work more reliably than PNP sensors in applications such as PLC and counter-tachometer, especially in terms of parasitic noise.
We recommend that you consider the connection diagram and detection
distance when choosing your sensor. The NPN vs PNP article on our
website might be useful in this regard.
Sensor size, output type, and head type can vary. The same sensor can have straight and angled head models.
Straight head sensors should be used for the clearest and most reliable detection. Since the body is already metal,
it is only sensitive to the metal in front of it and cannot detect any
unwanted material from other directions. Angled head sensors can respond
to both objects in front of them and metal objects in the neck area.
Our inductive sensors are high-quality devices designed specifically for the industrial automation sector and comply with inductive sensor standards. When making your selection, consider not only the price but also the impact of environmental conditions.
Please contact us for a sensor price list. Thank you.
+ Main page Metric 18 inductive >
+ All model inductive sensor >
PNP-NO 3 wire M18 inductive sensor. connector , 8 mm distance
PNP-NO 3 wire M18 inductive sensor. with connector , 8 mm distance Output type: PNP-NO (normally ope..
161.00USD Ex Tax: 161.00USD
PNP-NO 3 wire M18 inductive sensor. with connector , 5 mm
PNP-NO 3 wire M18 inductive sensor. with connector , 5 mm distance Output type: PNP-NO (normally ope..
155.00USD Ex Tax: 155.00USD

