invt servo systems

INVT Servo Systems - Servo Motors and Drives
INVT servo systems are designed for industrial machines requiring precise position, speed and torque control. The product range includes servo drives, servo motors and communication options for applications such as packaging, cutting, printing, robotics, machine tools and multi-axis motion control.
Our INVT servo range includes EtherCAT servo systems, servo sets with brake and servo sets without brake.
The high-performance functions described below mainly refer to the INVT DA200 servo series. Encoder type, power range, communication interfaces and motion functions may differ on DA180, DB100 and other INVT servo families.
High-performance servo control
2.0 kHz speed response: The DA200 series provides a speed response frequency of up to 2.0 kHz. Fast dynamic response helps reduce settling time and improves machine performance in high-speed positioning applications.
23-bit high-resolution encoder: The DA200 supports a 23-bit encoder, providing very high position resolution and improved low-speed control. Compared with a 17-bit encoder, the theoretical resolution is 64 times higher.
Wide power range: The DA200 servo drive family covers approximately 0.1 kW to 55 kW. Supply voltage, motor type and supported functions must be selected according to the specific drive model.
Advanced motion control functions
Full closed-loop control: The system can use an external load-side encoder or linear measurement device to achieve full closed-loop control. This helps reduce positioning errors caused by mechanical backlash, transmission clearance and deformation.
128-point internal position control: The DA200 supports up to 128 internal positioning points using terminal commands, external I/O or bus control. In simple indexing applications, some motion functions can be performed directly by the servo drive, reducing the workload of the PLC.
Electronic cam function: The DA200 supports electronic cam profiles with up to 3600 points. Cam curves can be configured using ServoPlorer software for applications such as flying cut, tracking, master-slave motion and synchronized machine processes.
Communication options: Depending on the drive model and communication version, INVT servo systems can support Modbus, CANopen, PROFINET and EtherCAT. EtherCAT is especially suitable for high-speed synchronized multi-axis applications.
Intelligent tuning and vibration control
Load inertia identification: Online and offline inertia identification functions help determine the mechanical load characteristics and simplify servo gain adjustment. This can reduce commissioning and tuning time.
Automatic and manual notch filters: The DA200 includes four notch filters for suppressing mechanical resonance and vibration. Filter frequencies can be adjusted within approximately 50 to 5000 Hz, and two filters can be adjusted automatically.
Low-frequency vibration suppression: Dedicated control algorithms help reduce low-frequency mechanical resonance, particularly in long-arm mechanisms, flexible structures and systems where residual vibration occurs after positioning.
Gantry synchronization: Two servo axes can operate in a synchronized control structure for gantry and portal applications. If the position deviation between the axes exceeds the permitted value, the control system can generate an alarm and stop operation.
Disturbance suppression: The control system compensates for the effects of sudden load changes, mechanical oscillation and parameter variation, helping improve system stability and command tracking performance.
Friction torque compensation: This function reduces the influence of static mechanical friction and improves command tracking at low speed. It is particularly useful where accurate torque control and smooth low-speed movement are required.
Gain adjustment and gain switching: Speed-loop gain, position-loop gain and filter parameters can be optimized according to machine rigidity and operating conditions. Two separate gain sets can be switched through I/O, communication or internal variables.
Speed observer: The speed observer helps reduce the influence of noise in feedback signals and improves command tracking performance, especially during low-speed operation.
INVT Servo Manuals and Software
- INVT DA200 Servo User Manual (PDF)
- INVT DA180 Servo User Manual (PDF)
- INVT DA200 Servo Catalog (PDF)
- INVT DA200 PROFINET Manual (PDF)
- INVT DA200 CANopen Manual (PDF)
- INVT ServoPlorer PC Software (RAR)
Related INVT Servo Pages
+ INVT Servo Sets without Brake
Refine Search
750 watt invt servo without brake
DA200 750 watt Servo Set without brake750 watt Set Content :SV-DA200-0R7-2-E0  ..
375.00USD Ex Tax: 375.00USD
